|
The New Fuji IS-1 IR-UV
Camera |
|
 |
 |
| The IS-1 is a specially
modified Neo-SLR digital camera with a built-in 10.7X zoom that helps
reduce dust common in interchangeable lens SLR's. This camera is more
suited to the point and shoot needs of of forensic or scientific
photographers, yet retains some of the basic features that made the S3
Pro UVIR so popular. The technology designed into the Fujifilm IS-1 was
initially designed for traditional visible wavelength imagery. However,
the natural low noise signature of the Fujifilm Super CCD produces high
quality high resolution images within a limited band of Visual to
Infrared. Because of the wide range of light spectrums captured,
focusing and exposure are often done manually. However if enough visible
light is available auto focusing will work. Unfiltered color
images will retain a pink hue due to the added presence of increased red
and infrared light captured. A great deal of this cast can be eliminated
by adding a hot mirror filter or UVIR cut filter to remove the presence
of IR light. |
Advanced Performance
at its Best |
- Fujifilm Super CCD sensor with 9.0 million effective pixels
sensitive to both visible and infrared light(Approx. 400nm-900nm)
- Fujifilm RP (Real Photo) Processor
Intelligent Flash system
New 28-300mm (10.7x) Fujinon zoom lens with manual twist-barrel zoom
control
- Class-leading sensitivity setting of ISO 1600 at full
resolution for photography in low light conditions
- Low sensitivity of ISO 80 for ultra-high quality photography
- recommend using at or above 200 ISO when shooting under IR lens
filtration conditions
- 2.0in, (235,000 pixel) tilting LCD screen for easy high and
low angle shooting
- Ultra-fast response times (0.01 second shutter lag and 0.8
second start-up)
- Real-time histogram to assist exposure settings before
shooting
- Highlight Warning feature for displaying highlight areas in
playback
- VGA movie capture of 30 frames per second with zoom
capability and sound
- Closed unit design to eliminate dust accumulation on the CCD
- Hotshoe and PC sync terminal
- Hyper Utility Software HS-V2 version 3 for RAW format
shooting
- Both xD-Picture Card™ and CompactFlash™/Microdrive compatible
|
|
Lens Filtration |
Live Preview Mode |
Specific wavelengths can be isolated and captured
from daylight or artificial light sources via lens filtering using the
PECA IR-UV Filters and by use of an
Alternative Light Source (ALS).
|
Due to the wide range of light spectrums
captured, focusing and exposure may need to be done manually. The IS-1's
live CCD preview mode from the cameras LCD monitor is helpful when
focusing. The 10X focus zoom in feature provides an extreme close-up
that you can use to fine tune your focus. |
|
Tilting LCD Display |
Picture
Stabilization Technology |
| The IS-1 has all its angles covered with a tilting 2"
LCD making it easy to frame your shot from a variety of shooting
positions. And thanks to the LCD gain up control, you'll be able to view
the LCD in bright and low light conditions even when the lens is
filtered with opaque IR filters. Sharp fine focus using manual focusing
via the LCD viewfinder is assisted by a 10X center point zoom feature.
The viewfinder is electronic with 235,000 pixel resolution and provides
approximately 100% coverage. |
Fast moving subject? No problem.
Fujifilm's Picture Stabilization technology utilizes the heightened
sensitivity of the Fujifilm IS-1 at ISO1600 and high-speed shutter
settings to prevent camera shake or freeze subject movement, keeping
blur to a minimum. This easy to access feature (selectable on the mode
dial) lets the Fujifilm IS-1 choose the correct light sensitivity and
best-matching shutter speed automatically, for the highest quality
digital pictures. |
471
Burton Street